• Place the device on a flat surface and switch it on.
• Position your hands over the suction area while filing or buffing nails.
• Turn off the device after use.
• Empty and clean the filter regularly for optimal performance.

Caution

• Keep away from water and moisture.
• Unplug before cleaning.
• Do not block the air vents during operation.

• Place the device on a stable work surface and connect it to the power source.
• Select and attach the desired drill bit securely.
• Turn on the drill and adjust the speed according to your service requirements.
• Switch on the fan to help capture dust while filing or shaping nails.
• Adjust the LED lamp to illuminate the working area for better visibility.
• Step 6: After use, turn off all functions, clean the dust collector area, and store the device safely.

• Step 1: Prep and cleanse the natural nail properly.
• Step 2: Apply a thin base layer and cure if required.
• Step 3: Apply 8 in 1 Functional Gel evenly to create the desired structure.
• Step 4: Cure under UV/LED lamp as recommended.
• Step 5: Shape, refine, and finish with top coat if required.

• Step 1: Prep nails — file, buff, cleanse, and apply UltraBond or Primer.
• Step 2: Apply a thin layer of Base Coat to the entire nail plate.
• Step 3: Cap the free edge.
• Step 4: Cure under UV/LED lamp for 30–60 seconds.
• Step 5: Proceed with your chosen Gel Polish colour.

• Step 1: Prep nails — buff, cleanse, apply UltraBond and Primer.
• Step 2: Apply a thin base layer of BIAB. Cure 60 seconds.
• Step 3: Apply a second, slightly thicker layer — build the apex for strength. Cure 60–120 seconds.
• Step 4: Shape and refine using a fine-grit file.
• Step 5: Apply VIRAA No Wipe Top Coat. Cure 60 seconds.

• Step 1: Prep nails — buff, cleanse, and remove moisture.
• Step 2: Apply VIRAA Base Coat. Cure 30–60 seconds.
• Step 3: Apply Black Gel Polish in thin even strokes. Cure 60 seconds.
• Step 4: Apply a second coat for full opacity and enhanced depth. Cure 60 seconds.
• Step 5: Apply VIRAA No Wipe Top Coat. Cure 60 seconds.

• Step 1: Ensure nails are clean and dry.
• Step 2: Gently buff the nail surface using light pressure.
• Step 3: Focus on removing natural shine without over-buffing.
• Step 4: Dust off any residue using a Nail Brush.
• Step 5: Proceed with primer, base coat, gel, acrylic, or polygel application.

• Step 1: Prep nails — buff, cleanse, and remove moisture.
• Step 2: Apply VIRAA Base Coat. Cure 30–60 seconds.
• Step 3: Apply Blood Red Gel Polish in thin even strokes. Cure 60 seconds.
• Step 4: Repeat for a second coat if desired. Cure 60 seconds.
• Step 5: Apply VIRAA No Wipe Top Coat. Cure 60 seconds.

• Step 1: Apply VIRAA Base Coat. Cure.
• Step 2: Apply Blooming Gel over cured base — do not cure.
• Step 3: Drop small dots or strokes of gel colour onto the Blooming Gel surface.
• Step 4: Watch the colour spread and bloom naturally. Adjust with a dotting tool if needed.
• Step 5: Cure under UV/LED for 60 seconds.
• Step 6: Seal with VIRAA No Wipe Top Coat. Cure.

• Step 1: Prep nails — buff, cleanse, and remove moisture.
• Step 2: Apply VIRAA Base Coat. Cure 30–60 seconds.
• Step 3: Apply Brown Town Gel Polish in thin even strokes. Cure 60 seconds.
• Step 4: Repeat for a second coat if desired. Cure 60 seconds.
• Step 5: Apply VIRAA No Wipe Top Coat. Cure 60 seconds.

• Step 1: Prepare the natural nail by cleaning, shaping, and applying the appropriate base product.
• Step 2: Apply a thin slip layer of Builder Gel without curing.
• Step 3: Place a bead of Builder Gel and spread evenly to build the desired structure and apex.
• Step 4: Cure under a UV or LED lamp according to product instructions.
• Step 5: Refine the shape if necessary and finish with a top coat for a glossy, professional result.

• Step 1: Prepare the natural nail by cleaning, shaping, and applying the appropriate base product.
• Step 2: Apply a thin slip layer of Builder Gel without curing.
• Step 3: Place a bead of Builder Gel and spread evenly to build the desired structure and apex.
• Step 4: Cure under a UV or LED lamp according to product instructions.
• Step 5: Refine the shape if necessary and finish with a top coat for a glossy, professional result.