• Clean and prep the natural nails.
• Select the best-fitting tip size.
• Apply adhesive to the tip.
• Press onto the nail and hold firmly.
• Allow the glue to set completely.
• Finish with gel polish, acrylic, or your preferred nail design.

• Prepare the natural nails by cleaning and buffing.
• Choose the correct tip size.
• Apply nail glue to the contact area.
• Press the tip firmly onto the nail.
• Allow the adhesive to dry completely.
• Apply your desired nail enhancement and finish.

• Clean and prepare the toenails.
• Select the appropriate tip size.
• Apply nail glue to the tip.
• Position carefully and press firmly onto the toenail.
• Allow the glue to set completely.
• Shape and finish with gel polish or nail art as desired.

• Prep and clean the natural nails.
• Select the correct tip size for each nail.
• Apply nail glue to the well area of the tip.
• Position and press onto the natural nail.
• Hold for a few seconds until secure.
• Trim, shape, and apply your preferred nail enhancement.

• Step 1: Ensure nails are clean and dry before trimming.
• Step 2: Position the cutter along the nail edge.
• Step 3: Trim nails carefully in small sections for smooth shaping.
• Step 4: Clean the cutter after every use.
• Step 5: Store in a dry and hygienic place.

• Place the device on a flat surface and switch it on.
• Position your hands over the suction area while filing or buffing nails.
• Turn off the device after use.
• Empty and clean the filter regularly for optimal performance.

Caution

• Keep away from water and moisture.
• Unplug before cleaning.
• Do not block the air vents during operation.

For Applying Artificial Nails

• Clean and dry your natural nails thoroughly.
• Apply a small amount of nail glue to the artificial nail or nail tip.
• Align the artificial nail with your natural nail.
• Press firmly for 10–15 seconds until securely attached.
• Allow a few minutes for the adhesive to fully set before proceeding with styling.

For Nail Repairs

• Clean the damaged nail area.
• Apply a small drop of glue to the crack or break.
• Hold gently until the glue sets.
• Buff and shape the nail if required.

• Step 1: Place the practice stand securely on a flat surface.
• Step 2: Attach practice nail tips onto the holders.
• Step 3: Perform nail art, gel, or extension practice as required.
• Step 4: Remove and replace practice tips after use.
• Step 5: Clean and store the stand properly after practice sessions.

• Step 1: Ensure nails are clean and dry before trimming.
• Step 2: Position the cutter along the nail edge.
• Step 3: Trim nails carefully in small sections for smooth shaping.
• Step 4: Clean the cutter after every use.
• Step 5: Store in a dry and hygienic place.

• Step 1: Open the bottle and fill with the desired salon liquid.
• Step 2: Secure the pump lid tightly.
• Step 3: Press the top gently using a cotton pad or wipe to dispense liquid.
• Step 4: Use the required amount during the nail service.
• Step 5: Close properly and clean the surface after use.

• Step 1: Hold the filer firmly and position it at the nail edge.
• Step 2: File in one direction to achieve the desired shape.
• Step 3: Refine corners and sidewalls for a clean finish.
• Step 4: Smooth rough edges before product application.
• Step 5: Clean or replace the filer regularly for hygienic use.

• Step 1: Hold the Butterfly Filer comfortably and position it against the nail edge.
• Step 2: File gently in one direction to shape the nail.
• Step 3: Use the curved sections to refine contours and sidewalls.
• Step 4: Smooth rough edges and prepare the nail surface as required.
• Step 5: Clean or replace the filer regularly to maintain hygiene.