• Clean and prep the natural nails.
• Select the best-fitting tip size.
• Apply adhesive to the tip.
• Press onto the nail and hold firmly.
• Allow the glue to set completely.
• Finish with gel polish, acrylic, or your preferred nail design.

• Prepare the natural nails by cleaning and buffing.
• Choose the correct tip size.
• Apply nail glue to the contact area.
• Press the tip firmly onto the nail.
• Allow the adhesive to dry completely.
• Apply your desired nail enhancement and finish.

• Step 1: After filing or buffing, hold the Nail Brush comfortably.
• Step 2: Gently brush across the nail surface and surrounding skin.
• Step 3: Remove all dust, filing particles, and residue.
• Step 4: Repeat as needed before product application.
• Step 5: Clean the brush regularly to maintain hygiene.

For Applying Artificial Nails

• Clean and dry your natural nails thoroughly.
• Apply a small amount of nail glue to the artificial nail or nail tip.
• Align the artificial nail with your natural nail.
• Press firmly for 10–15 seconds until securely attached.
• Allow a few minutes for the adhesive to fully set before proceeding with styling.

For Nail Repairs

• Clean the damaged nail area.
• Apply a small drop of glue to the crack or break.
• Hold gently until the glue sets.
• Buff and shape the nail if required.

• Step 1: Apply polygel or extension product to the dual form or nail mold.
• Step 2: Position the mold correctly on the natural nail.
• Step 3: Attach the Nail Mold Fixing Clip to secure the mold in place.
• Step 4: Cure under a UV or LED lamp according to product instructions.
• Step 5: Remove the clip after curing and proceed with shaping and finishing.

• Step 1: Open the bottle and fill with the desired salon liquid.
• Step 2: Secure the pump lid tightly.
• Step 3: Press the top gently using a cotton pad or wipe to dispense liquid.
• Step 4: Use the required amount during the nail service.
• Step 5: Close properly and clean the surface after use.

• Step 1: Apply cleanser or alcohol solution to the Nail Wipe if required.
• Step 2: Gently wipe the nail surface to remove dust, oils, and debris.
• Step 3: Use before product application for proper nail preparation.
• Step 4: After curing gel products, wipe away the tacky layer if needed.
• Step 5: Dispose of the wipe after use.

• Step 1: Complete gel colour application and cure.
• Step 2: Apply a thin, even coat of No Wipe Matte Top Coat.
• Step 3: Cap the free edge.
• Step 4: Cure under UV/LED for 60 seconds.
• Step 5: Done — no wiping. Finish with cuticle oil.

• Step 1: Complete gel colour application and cure.
• Step 2: Apply a thin coat of No Wipe Shimmer Top Coat.
• Step 3: Cap the free edge.
• Step 4: Cure under UV/LED for 60 seconds.
• Step 5: Apply a second coat for more intensity. Cure.

• Step 1: Complete your full gel colour application.
• Step 2: Apply a thin, even layer of No Wipe Top Coat.
• Step 3: Cap the free edge to seal the nail.
• Step 4: Cure under UV/LED lamp for 60 seconds.
• Step 5: Done — no wiping needed. Finish with cuticle oil.

• Step 1: Prep the nail — cleanse, push back cuticles, lightly buff the surface.
• Step 2: Apply UltraBond or Primer to enhance adhesion.
• Step 3: Apply one thin coat of One Coat Gel Polish. Cure under UV/LED lamp for 60 seconds.
• Step 4: Apply Top Coat. Cure for 60 seconds.
• Step 5: Wipe with a cleanser if needed. Finish with cuticle oil.

• Step 1: Prepare the natural nail by gently buffing and cleansing the surface.
• Step 2: Apply a thin layer of VIRAA PH Bond to the natural nail only.
• Step 3: Allow it to air dry for a few seconds.
• Step 4: Follow with Primer if required, then continue with gel, acrylic, or BIAB application.